Vise Mask
Small grit blast vise mask for large heavy turbine blades
Vise Mask
Bottom view of vise mask.
Vise Mask
Large energy turbine blade in a Vise Masks. Vise mask has removable jaws to decrease the cost of replacing a […]
Vise Mask
A large grit blast mask with aluminum internal clamping mechanism covered by Shore A 64 high performance urethane.
Vise Mask
Vise mechanism with custom molded grit blast masking jaws removed
Vise Mask
Vise mechanism prior to urethane encapsulation
Overspray Protection
Two part, wrap around shot peen mask. Mask snaps together and holds the red protection socks in place on engine […]
Overspray Protection
Armored cloth protection socks. Urethane coated canvas with molded lower ring that fits to urethane shot peen mask. Velcro closure […]
Overspray Protection
Engine components protected by armored cloth protection socks.
Robotics
Robotic arm clamps manufactured from high durometer urethane. Clamps incorporate replaceable masking wear zones for increased economics.
Robotics
Custom molded robotic arm clamps hold part during grit blast operation. Clamps mask areas to be protected when holding part.
Robotics
Custom molded, Shore A 95 urethane holding fixture for robotic arm pick up & placement of part to be processed.
Internal Structures
One half of mask with rigid inner skeleton and compression clip. Clip slides through mask and into rigid post to […]
Internal Structures
Self clamping z notch grit blast mask. Use an Allen wrench to tighten the embedded rigid clamp to keep the […]
Internal Structures
Molded yellow plastic internal skeleton creates rigid support to successfully mask the inner & outer shroud details during airfoil treatment.
Internal Structures
Custom molded self clamping mechanism in mold ready to be encapsulated in rubber to create a z-notch grit blast mask.
Internal Structures
Patent Pending self clamping technology. Embedded clamp tightens down to hold small parts or blades securely during processing.
Internal Structures
2nd half of compression clip mask.
Exclusive Maxol Studios Technology
Compression clip slips into mask to prevent media from entering mask parting lines.
Exclusive Maxol Studios Technology
Registration dams help locate multiple mask pieces together & keep media out of parting lines.
Exclusive Maxol Studios Technology
Molded parting lines allows metal parts to be easily placed and removed from the mask increasing line speed while reducing […]
Exclusive Maxol Studios Technology
Molded nipple & socket snap technology securely holds the mask together during operator handling and machine processing.
Exclusive Maxol Studios Technology
Urethane grit blast mask for vane inner & outer shroud protection. Both inner & outer shroud masks incorporate replaceable wear […]
Profiles & Rings
Cast extruded inner & outer ring masks. Top outer ring (blue) incorporates rigid internal structure that is bolted to lower […]
Profiles & Rings
Multi cavity thermal spray strip masks. Custom molded 4 up silicone strip masks slide onto aluminum channel to produce any […]
Profiles & Rings
Maxol Studios proprietary cast extrusion method of making long profile sections to fit large ring & shroud masks
Profiles & Rings
Exclusive Maxol Studios extrusion cast curved profiles with imbedded rigid support (yellow piece to the right)
Tumbling
Large tumbling mask with molded rigid internal support for optimum security of vane in mask.
